Logitech · Mac and office · sound
Logitech MX Mechanical
sound test.
Logitech's office keyboard with actual switches under it, sold in three versions that sound genuinely different from each other. Press play on each below and compare them on the same phrase.
Press play
What a Logitech MX Mechanical
sounds like.
Each button plays a short phrase typed on that switch family, so you are comparing rhythm rather than a single tap. Play two in a row — that is where the difference actually shows up.
These are recordings of the switch family, not of this exact keyboard. That is the honest way to do it — the family is what dominates the sound, and switch options move between model years and regions. Check the listing before buying on the strength of a match here.
What you are hearing
How it
actually sounds.
All three MX Mechanical variants use low-profile Kailh Choc V2 switches with 3.2 mm of travel, against the 4 mm of a full-height board. That shorter travel is the thing to understand about how this keyboard sounds: everything happens faster and lands higher in pitch than the same switch family would in a normal mechanical keyboard.
The Clicky version is unmistakably clicky but noticeably tighter and less resonant than a Cherry MX Blue — the click is there, it just does not ring. The Tactile Quiet version is the one most people buy, and Logitech has damped it specifically: you get the bump without much sound at all. The Linear is the smoothest and lowest of the three, though on a board this shallow that is a relative claim.
Across all three, the low-profile aluminium case keeps things controlled rather than hollow. This is not a keyboard that sounds expensive in the way a gasket-mounted custom does, but it also never sounds cheap.
Why it sounds that way
The build
behind the noise.
Low-profile Kailh Choc V2 switches in an aluminium-topped case, with 3.2 mm of travel and 1.3 mm of pre-travel. The Clicky and Linear switches actuate at around 43 g and the Tactile Quiet at around 45 g, with Logitech specifying its own damping on the tactile version rather than shipping a stock Choc Brown. The switches are soldered — this board is not hot-swappable, so the version you buy is the version you keep.
- Switches
- Kailh Choc V2, low profile
- Travel
- 3.2 mm, 1.3 mm pre-travel
- Case
- Aluminium top plate
- Hot-swap
- No, soldered
Which one to pick
Choosing
the switch.
This is one of the clearest three-way comparisons on the site, because it is genuinely the same keyboard three times — same case, same keycaps, same travel, with only the switch changed. Play the three in order and what you are hearing is the switch family in isolation, without a case difference confusing the picture.
Same brand
More from
Logitech.
The Logitech keyboard sound hub collects them on one page.
Same category
Other keyboards
in this category.
Or read the full round-up of 51 popular keyboards matched to a sound, and open the keyboard sound lab to play all eight packs on a keyboard you can type on.
By switch
Or shop
by switch.
If you already know which switch you are choosing between, the switch pages go deeper than any single keyboard page can — the same recordings with Cherry's published specifications, what the mechanism is actually doing, and who each one suits.
Take it with you
Want this sound
on your Mac?
This page only makes sound while the tab is focused. TypeLouder plays the same recordings system-wide — in your editor, your terminal, your email — on whatever keyboard you already own, through your speakers or privately through headphones.
It never reads or stores your keystrokes, and it has no network access at all.
Get TypeLouder — $2.99 one-timemacOS 15.5 or higher · No subscription
Good questions
Logitech MX Mechanical
questions.
Which MX Mechanical switch is quietest?
The Tactile Quiet. Logitech damps it specifically for office use, and it is the version sold as the default in most regions. The Linear is close behind and smoother, but it has no bump, so you get less feedback for a similar noise level. The Clicky version is much louder than either and is the wrong choice for a shared room.
Is the MX Mechanical hot-swappable?
No. The switches are soldered to the PCB, so the version you order is permanent short of desoldering the board yourself. This matters more than usual here because the three variants are the only real difference between them — pick the wrong switch family and there is no fixing it later.
Does the MX Mechanical sound like a normal mechanical keyboard?
It sounds like a compressed version of one. The switch families are the same and the character carries over, but 3.2 mm of travel instead of 4 mm makes everything quicker and higher in pitch, and the thin case gives it none of the low end that a full-height board has. If the deep thock is what you are after, this is not the keyboard — but it is much closer than any scissor board gets.
The audio on this page comes from community-recorded sound packs, used under the MIT licence. They are recordings of the switch family, not of a Logitech MX Mechanical and MX Mechanical Mini specifically. All product and brand names are trademarks of their respective owners; this page is not affiliated with or endorsed by them.