Skip to main content

Top level navigation menu

HyperX · Gaming · sound

HyperX Alloy Rise
sound test.

HyperX building a keyboard the way enthusiasts do, and a useful before-and-after against the Alloy Origins. Press play below.

Real recordingsNo download2 switch options

Press play

What a HyperX Alloy Rise
sounds like.

Each button plays a short phrase typed on that switch family, so you are comparing rhythm rather than a single tap. Play two in a row — that is where the difference actually shows up.

These are recordings of the switch family, not of this exact keyboard. That is the honest way to do it — the family is what dominates the sound, and switch options move between model years and regions. Check the listing before buying on the strength of a match here.

What you are hearing

How it
actually sounds.

The Alloy Rise is what happens when a gaming brand reads the room. It is gasket-mounted with a multi-layer foam stack and hot-swap sockets, which is enthusiast construction rather than gaming construction, and it sounds nothing like the Alloy Origins that preceded it.

Gone is the plate ping and the metallic brightness. In their place is a fuller, lower sound with the impact absorbed rather than reflected — the linear versions in particular land as a rounded clack instead of a sharp one.

Putting this board next to an Alloy Origins is one of the clearest demonstrations available that construction beats switch. Same brand, similar switches, and two keyboards that sound like they came from different decades.

Why it sounds that way

The build
behind the noise.

A gasket-mounted board with a multi-layer foam stack and hot-swap sockets taking standard MX switches, with customisable weights and top plates. The move from the Alloy Origins' exposed undamped aluminium plate to a gasket mount with foam is the entire acoustic story, and it is a deliberate repositioning toward the enthusiast market.

Mounting
Gasket mount
Damping
Multi-layer foam
Hot-swap
Yes, standard MX
Customisation
Swappable weight and top plate

Which one to pick

Choosing
the switch.

With hot-swap sockets and this much damping, the stock switch is a starting point rather than a verdict. The linear is the option that shows what the foam stack is doing; the tactile keeps that base and adds definition.

Same brand

More from
HyperX.

The HyperX keyboard sound hub collects them on one page.

Same category

Other keyboards
in this category.

Or read the full round-up of 51 popular keyboards matched to a sound, and open the keyboard sound lab to play all eight packs on a keyboard you can type on.

By switch

Or shop
by switch.

If you already know which switch you are choosing between, the switch pages go deeper than any single keyboard page can — the same recordings with Cherry's published specifications, what the mechanism is actually doing, and who each one suits.

Take it with you

Want this sound
on your Mac?

This page only makes sound while the tab is focused. TypeLouder plays the same recordings system-wide — in your editor, your terminal, your email — on whatever keyboard you already own, through your speakers or privately through headphones.

It never reads or stores your keystrokes, and it has no network access at all.

Get TypeLouder — $2.99 one-time

macOS 15.5 or higher · No subscription

Good questions

HyperX Alloy Rise
questions.

How does the Alloy Rise compare to the Alloy Origins?

They are opposites. The Origins is an exposed aluminium plate with no damping — bright, ringy, with audible plate ping. The Rise is gasket-mounted with a foam stack — full, low, and absorbed. Same brand, and the two boards demonstrate more clearly than almost any other pair how much the construction matters relative to the switch.

Is the HyperX Alloy Rise hot-swappable?

Yes, with standard MX sockets, so the entire aftermarket switch catalogue works with it. Combined with the gasket mount and foam stack, that makes it a genuinely tunable board — which is unusual for a mainstream gaming brand and is the main reason it appears in enthusiast conversations at all.

Do gaming keyboards need to sound bright?

No, and the Alloy Rise is the proof. Gaming boards sound bright because of the exposed-plate construction used to show off RGB, not because of anything about gaming switches. Close the case, add gaskets and foam, and the same category of switch produces a deep, full sound. Several brands have now worked this out.

The audio on this page comes from community-recorded sound packs, used under the MIT licence. They are recordings of the switch family, not of a HyperX Alloy Rise specifically. All product and brand names are trademarks of their respective owners; this page is not affiliated with or endorsed by them.

← Back to TypeLouder